3 - 56
Controller
MEE15K022
3. System remote controller
YKB/YLM 2nd
4. Connecting LAN cable
Connect the LAN cable to the LAN port on the EB-50GU.
●
The LAN cable is field supplied. Use a category 5 or above straight LAN cable.
●
Use a switching HUB.
●
The maximum distance between the switching HUB and EB-50GU is 100 m (328 ft).
LAN port
Note
●
LAN must be installed before the unit installation. Route the LAN cable to the EB-50GU in the same way as
the M-NET transmission cables.
●
Leave enough space around the LAN port on the EB-50GU to allow for the connection of the cables.
Refer to Installation and Instructions Manual.
●
When connecting the EB-50GU to an existing LAN, consult the system administrator to decide the IP address.
The IP address can be changed with the dipswitch or from the Web browser.
●
To prevent unauthorized access, always use a security device such as a VPN router when connecting the
EB-50GU to the Internet.
