7. OPTIONAL PARTS
DATA G10
OUTDOOR UNITS
2 - 212
HP
7-3. OUTDOOR TWINNING KIT
For PUHY-HP-YSHM, following optional Outdoor Twinning Kit is needed to use to combine to refrigerant flows of its PUHY-HP-
YHM. Details of selecting the proper kit should be referred to the System Design Section.
49
(2 pcs.)
98
241
183
83
505
342
588
160
62
49
62
Distributer
Distributer
Pipe cover
(Dot-dashed part)
12.7
12.7
12.7
12.7
Local brazing
Note 2
15.88
15.88
28.58
Note 2
25.4
22.2
25.4
22.2
Pipe cover
(Dot-dashed part)
Local brazing
28.58
(2 pcs.)
22.2
19.05
12.7
15.88
12.7
9.52
28.58
22.2
For Gas pipe:
For Liquid pipe:
ID: Inner Diameter
OD: Outer Diameter
mm
CMY-Y100VBK2
<Deformed pipe(Accessory)>
49
(2 pcs.)
(2 pcs.)
98
241
183
83
505
342
588
160
62
49
62
Distributer
Distributer
Pipe cover
(Dot-dashed part)
12.7
12.7
12.7
12.7
Local brazing
Note 2
15.88
15.88
28.58
Note 2
25.4
22.2
25.4
22.2
Pipe cover
(Dot-dashed part)
Local brazing
28.58
(2 pcs.)
22.2
19.05
12.7
15.88
12.7
9.52
28.58
22.2
For Gas pipe:
For Liquid pipe:
ID: Inner Diameter
OD: Outer Diameter
mm
CMY-Y100VBK3
<Deformed pipe(Accessory)>
Slope of the twinning pipes are at an angle within
15
to the horizontal plane.
2. Use the attached pipe to braze the port-opening of the twinning pipe.
3. Pipe diameter is indicated by inside diameter.
4. Only use the twinning pipe by Mitsubishi (optional parts).
Note 1. Refer to the figure below for the installation position of the twinning pipe.
Twinning pipe
15
