3 - 46
Controller
MEE15K022
3. System remote controller
YKB/YLM 2nd
When using the LAN connection function, connect the LAN cable to the
LAN connector of this device.
Procure the LAN cable at the site, and use 100 BASE-TX Straight cable.
For a description of the IP address setting method, refer to Instruction Book.
LAN is 100 BASE-TX Specification.
3. LAN connection function
Perform the LAN wiring before installation, and wire up to the body by the same method as wiring the M-NET
transmission
line.
When a LAN is already connected, decide the IP address by consultation with the system administrator and
connect to the LAN body after changing the IP address.
Connect AG-150A to a private network.
Use a security device such as a VPN router when connecting the AG-150A to the Internet to prevent
unauthorized
access.
(If no security devices are installed, the operation settings may be changed by an unauthorized person
without the knowledge of the user.)
LAN
NOTE
