3 - 28
Controller
MEE15K022
3. System remote controller
YKB/YLM 2nd
4. Connecting the LAN cable
Connect the LAN cable to the LAN1 port on the AE-200E/AE-50E/EW-50E. (The LAN2 port is unused.)
●
The LAN cable is not supplied. Use a category 5 or above straight LAN cable.
●
Use a switching HUB.
●
The maximum distance between the switching HUB and AE-200E/AE-50E/EW-50E is 100 m (328 ft).
●
The recommended number of connected devices such as gateway, router, layer 3 switch, or HUB between the AE-200E and
AE-50E/EW-50E is four or less.
AE-200E
AE-50E
EW-50E
Note
●
LAN must be installed before the unit installation. Route the LAN cable to the AE-200E/AE-50E/EW-50E in the same way as
the M-NET transmission cables.
●
When connecting the
AE-200E/AE-50E/EW-50E to an existing LAN, consult the system administrator to decide the IP address.
Change the IP address setting before connecting the LAN cable to the LAN1 port.
●
T
o prevent unauthorized access, always use a security device such as a VPN router when connecting the AE-200E/AE-50E/
EW-50E to the Internet.
LAN2
LAN1
LAN
Max. 100 m (328 ft)
HUB
Max. 100 m (328 ft)
Max. 100 m (328 ft)
LAN
LAN
