3 - 22
Controller
MEE15K022
3. System remote controller
YKB/YLM 2nd
Centralized controller
AE-200E
M-NET
ME remote
controller
M-NET
M-NET
ME remote
controller
ME remote
controller
1. Power supply to AE-200E
AE-200E needs AC power (100-240VAC) and M-NET
; the former is for centralized control transmission use and the latter is
for AE-200E's operating and LAN function use.
Except when the sub system controller is used, the power supply unit PAC-SC51KUA or the power supply from the outdoor
unit to M-NET is not necessary
. For more details, please refer to the Installation Manual of AE-200E/AE-50E.
(1). The basic scheme is as follows.
Fig.1 AE-200E basic scheme.
2. M-NET power supply
AE-200E/AE-50E has a built-in function to supply power to the M-NET transmission line.
The amount of power that an AE-200E or an AE-50E can supply is equivalent to the power required by an MN converter
(CMS-MNG-E) that is used for maintenance.
Supplying power from the outdoor unit or the power supply unit, it is necessary to disconnect the M-NET
power jumper CN21. (At factory setting, CN21 is connected.)
When connecting both AE-200E/AE-50E and the system controller (Advanced touch controller, ON/OFF
remote controller, etc.) to the same M-NET system, it is necessary to connect the power supply unit
(PAC-SC51KUA), and disconnect the M-NET power jumper CN21 on AE-200E/AE-50E.
Note
When connecting both AE-200E/AE-50E and BAC-HD150 (BM ADAPTER) to the same M-NET system,
certain restrictions apply. Consult your dealer for details.
LOSSNAY
remote
controller
LOSSNAY unit
